If peak oil was the cry of environmentalists throughout the 2000s, peak water will become the cry of the last half of the 2010s. While it seems unthinkable that Britain could run out of water, the fact is that much of what is produced in the UK requires inordinate amounts of it. However, it’s not only industry that’s diminishing Britain’s water supply. Global warming is also having an impact, as is the population boom. With Britain’s crop production and agricultural economy facing the potential of catastrophic failure, the time is now for businesses to seek sustainable water solutions. This is where rainwater harvesting comes in.
Incredibly, the process of rainwater harvesting is so simple, it’s amazing Britain hasn’t been doing so for decades. Rain collects on the roof, travels down a pipe, and passes through a filter. This filter ensures no large particles of debris make it to the central part of the tank. Once filtered, the clean water enters an inlet where the flow is calmed to prevent further debris from being distributed. As the tank fills, a floating extraction system pumps the cleanest filtered water back into your building for non-potable use.
Conserving Energy in Multiple Ways
One of the most impressive features of a high quality rainwater harvesting system is that it costs very little to run. The best systems operate a dual pump, generating 20% less energy than inferior rainwater harvesting systems. At the same time, your rainwater harvesting system can save your business up to 75% on its potable water bills, if employed as part of an overall water management project. Mains water consumption may also be reduced by up to 30%.
It’s nice to see how much water and money you’re saving while you’re looking after the planet, and rainwater harvesting systems come complete with a remote monitoring system. This means you can check your water consumption at any time and pay attention to any sudden spikes in water usage. You’ll also be the first to know if there is a fault with your rainwater harvesting system, as it comes with alarms that will alert you if any part of the system fails or even if it needs a clean. In any case, you’ll never run out of water as your rainwater harvesting system will automatically switch to your mains supply if the water level gets too low. In essence you’ll be guaranteed good quality water without fail.
Impressively, it’s not only the internal working of the best rainwater harvesting systems that are kind to the environment, but their cladding and installation. The tanks are steel reinforced and custom-built for each installation. This makes them chemical resistant and extremely durable. Rotatable drainage turrets and ducting connections keep weight light, allowing for quick and easy installation. This results in a tank that requires 25 times less concrete than standard tanks, resulting in a reduced carbon footprint from the outset.
If you think looking after the environment comes at a price, you’ll be surprised at how profitable your rainwater harvesting system will become. Purchasing a WaterManager rainwater harvesting system from Waterscan will immediately entitle you to Enhanced Capital Allowances through DEFRA. Combine these tax breaks with the reduction in water bills mentioned above, and wrap these up with an impressive ROI on the system itself, and you’ll be looking after the planet while you laugh your way to the bank.
As Britain heads toward a future defined by water shortages, it’s the businesses that become sustainable now that will benefit in the future. A rainwater harvesting system is simple, efficient, financially prudent, and futureproofed. It’s highly likely more companies will be using them as time goes on. Getting in on the ground floor would be a very wise move indeed.